CNC Machined 6061 Aluminum Mounting Plate with Two Counterbores
CNC machined 6061 aluminum mounting plate for an electric boat, with two stepped counterbores, smaller holes near the edges and a silver anodized finish.
Category:
CNC Machining
Case Studies
key word:
CNC Machining
- Product Description
-
Product Information
Manufacturing Process CNC machining Material 6061 aluminum alloy Part Type Mounting plate Application Electric boat Visible Features Two stepped counterbores on one face, smaller holes near the plate perimeter and rounded outside corners Post-processing Silver anodizing Counterbore Alignment and Screw Seating
Each counterbore must align with its smaller through-hole. The recess diameter and depth must suit the specified screw head so it seats squarely without projecting above the plate face.
Small-Hole Position and Mounting Face Flatness
Some small holes are close to the plate edge or a counterbore. Remove burrs from the drilled openings and check hole locations and center-to-center distances against the drawing. Check the mounting face for flatness so the plate can sit evenly against its mating surface.
Hole Size After Anodizing
Anodizing can reduce the finished diameter of a hole. If a small hole locates a pin, plan the machining allowance or mask the bore as permitted by the finish requirements. Recheck the finished diameter after anodizing against the specified fit.
Project Value
The two counterbores control how the screw heads seat, while the small-hole pattern controls alignment with the mating part. Checking those features along with mounting face flatness and finished hole size helps prevent fit issues at assembly.
Key words:- CNC machined aluminum mounting plate
- 6061 aluminum counterbored plate
- electric boat mounting plate
previous page
next page
Related products
Message
If you are interested in our products, welcome to leave a message, we will contact you as soon as possible!