Home page

Swiss Machined 304 Stainless Steel Flange Connector with Offset Hole

Name: Swiss Machined 304 Stainless Steel Flange Connector with Offset Hole
Brand: Fengnuo
Availability: InStock

Swiss lathe machined 304 stainless steel flange connector with an offset round hole, a short cylindrical shank, and an oblong opening in the floor of a circular recess. Finished by deburring.

Category:

Swiss Lathe Machining

Case Studies

key word:

Swiss Lathe Machining

Custom Machining

jake@gdfengnuo.com

Message

Product Description

Product Information

Manufacturing Process	Swiss lathe machining
Material	304 stainless steel
Part Type	Flange connector with an offset hole
Visible Geometry	Circular flange, offset round hole, circular recess with an oblong opening in its floor, and short cylindrical shank
Post-processing	Deburring

Recessed Oblong Opening

The oblong opening sits in the floor of the circular recess. The surrounding recess wall limits tool access, so the opening width, contour and position relative to the locating features need to be controlled. If the opening mates with a flat-ended component, excessive width can introduce play, while insufficient width can prevent insertion.

Datum Control Across Both Ends

Mating features on the flange and shank ends should be controlled from a common datum system. If both the circular recess and the shank outside diameter serve as locating features, part transfer or secondary clamping must preserve their coaxial relationship and control face runout relative to the locating axis.

Deburring

The specified finishing step is deburring. The edges of the oblong opening, offset hole and accessible end openings require attention. Edge cleanup should preserve the opening profile and avoid removing material from locating surfaces beyond the drawing requirements.

Project Value

This case illustrates how a recessed opening and features on opposite ends of a compact flange connector must be controlled together. Tool access, datum transfer and edge finishing all affect the geometry available for assembly.

Key words: