Home page

Swiss Machined 304 Stainless Steel Slotted Hex Hollow Connector

Name: Swiss Machined 304 Stainless Steel Slotted Hex Hollow Connector
Brand: Fengnuo
Availability: InStock

Swiss lathe machined 304 stainless steel hollow connector with a side slot in the hex head, a stepped body and an externally threaded end. Finished by deburring.

Category:

Swiss Lathe Machining

Case Studies

key word:

Swiss Lathe Machining

Custom Machining

jake@gdfengnuo.com

Message

Product Description

Product Information

Manufacturing Process	Swiss lathe machining
Material	304 stainless steel
Part Type	Slotted hex hollow connector
Visible Geometry	Hex head with a side slot, axial bore openings, stepped body and external thread
Post-processing	Deburring

Angular Location of the Head Slot

The side slot is machined into a flat on the hex head. The setup must establish the angular position of the hex head before cutting the slot. Slot width, depth and location relative to the specified hex flat must meet the drawing requirements so the mating feature can enter and seat as intended.

Slot Edges and Floor Corners

Burrs can remain at the slot mouth and where the slot walls meet the floor. Deburring must reach these areas while preserving the slot width, depth and edge profile. The externally threaded end and visible bore openings are also areas to check for raised edges.

Project Value

The case illustrates how an angularly located side slot and a turned connector body must be controlled together. The hex flat provides the reference for the slot, while the slot geometry and edge condition affect mating-part engagement.

Key words: