Home page

Swiss Machined 304 Stainless Steel Side-Opening Sleeve

Name: Swiss Machined 304 Stainless Steel Side-Opening Sleeve
Brand: Fengnuo
Availability: InStock

Custom 304 stainless steel sleeve produced by Swiss lathe machining, with a stepped head and an elongated side opening, finished by grinding and polishing.

Category:

Swiss Lathe Machining

Case Studies

key word:

Swiss Lathe Machining

Custom Machining

jake@gdfengnuo.com

Message

Product Description

Product Information

Manufacturing Process	Swiss lathe machining
Material	304 stainless steel
Part Type	Custom sleeve with a side opening
Structural Features	Slender cylindrical body, stepped head and an elongated side opening
Post-processing	Grinding and polishing

Part Geometry

This 304 stainless steel component has a slender cylindrical body, a stepped head and an elongated opening in the side wall. The photographs show the overall form and the transition between the head and the smaller cylindrical section. The case is presented as a custom side-opening sleeve; its application and internal geometry are not specified.

Machining Focus

The manufacturing focus is to coordinate the turned profile and the side opening while supporting the slender component during machining. Workholding, tool access and the sequence used to form the opening require attention to the part geometry. The opening edges and transitions between diameters are key areas to review against the drawing. No numerical tolerances or inspection results are claimed here.

Grinding and Polishing

The specified finishing operations are grinding and polishing. Finishing should preserve the defined profile and opening geometry while addressing accessible surface marks and edges. Care is needed around the opening and head transition to avoid excessive edge rounding or local material removal. Surface roughness values are not stated because no measured specification has been provided.

Project Value

This case illustrates Swiss lathe machining combined with a local side-opening feature and subsequent grinding and polishing in 304 stainless steel. It provides a reference for discussing the relationship between a slender turned profile, local features and finishing requirements when developing similar custom sleeves.

Key words: